> For the complete documentation index, see [llms.txt](https://sharinghub-eng.kittenbot.hk/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://sharinghub-eng.kittenbot.hk/educational-kit-sets/sumobot-12-in-1-kit/sumobot-12-in-1-model-instructions/robopusher.md).

# RoboPusher

Make use of its agility to retrieve important resources from the arena.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/transport.png)

### Building Instructions and Sample Programs

[Building Instructions](https://bit.ly/12In1SumobotBuildingInstruction)

Sample Programs:

[RoboPusher-JoyFrog Controller](https://makecode.microbit.org/_Rrh8fsVpUb17)

[RoboPusher-Microbit Controller](https://makecode.microbit.org/_diEUaYgt1Dhc)

[RoboPusher-Robot](https://makecode.microbit.org/_KpUhpri1K8za)

### Sample Wiring

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/transport_wire.png)

### Operating the Robot

#### JoyFrog Controller:

1. The robot should show a red light and the controller should show a cross (X) when the power is switched on.
2. Press X to pair the robot, the robot should show a green light upon successful pairing.
3. Use the joystick for movement.

#### Microbit Controller:

1. The robot should show a red light and the controller should show a cross (X) when the power is switched on.
2. Press A+B to pair the robot, the robot should show a green light upon successful pairing.
3. Use the accelerometer for movement.