# FutureOS Operation Guide

FutureOS is the GUI developed for FutureBoard, its main function is to provide an interface to select which .py file to run.

FutureOS Functions:

* Storing and selecting .py files from the SD Card.
* 1-Click Airkiss
* Checking Firmware Version
* Factory Reset

### Entering FutureOS

By default, FutureBoard runs main.py if it is found.

FutureOS can be entered by pressing A during the opening animation.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos1.png)

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos2eng.jpg)

### FutureOS Functions

Press A to go to the next option, press B to confirm.

#### Select

Select and run the .py files from the SD Card.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos3eng.jpg)

#### Network

Various Networking options are here.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos4eng.jpg)

#### About

Check the firmware version and MAC Address here.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos5eng.jpg)

#### Factory Reset

Factory Reset and clear all files on SD Card.

![](https://kittenbothk-eng.readthedocs.io/en/latest/_images/futureos6eng.jpg)