Voice Recognition (Firmware v1.9.5 or above)
KOI is able to recognize our commands after training.
Recognizing Voice Commands
Loading Extensions
Search "KOI" in the search bar.
Or copy and paste the following link to the search bar.
https://github.com/KittenBot/pxt-koi
Blocks for voice recognition:
Sample Program
Program Flow
1: Download the program to the Micro:bit.
2: Press A and record the first command. A green color will be shown if the command has been successfully added. Otherwise red will be shown.
3: Press B to continue, you can now repeak step 2 and record the next command.
4: Repeat step 2-3 to record all your commands.
5: Press A and B at the same time to recognize a command. A green color will be shown if KOI successfully recognizes your command, else it will show a red color. The command ID will be shown on Micro:bit.
Sample Codes
1. Voice Recognition(Firmware1.9.5_Extension0.5.7)
Voice Recognition Demo Video
Extension Version and Updates
There may be updates to extensions periodically, please refer to the following link to update/downgrade your extension.
FAQ
1: There is no reaction after pressing the buttons on the Micro:bit.
· A: This is because KOI has a longer boot time than Micro:bit. When the power is turned on, Micro:bit has already ran the code for KOI initialization before KOI is ready.
· Solution: Reset your Micro:bit after KOI has been turned on. (The trick is to let KOI power on completely before initialization.)
2: Does KOI work with 3V input?
· A: No, KOI only works with 5V.
3: KOI displays red everytime I try to record my command.
· A: The noise level hasn’t been calibrated, it is essential to run the block before voice recognition.
Last updated