KOI (1 & 2) have separate firmware files, you need to download the correct one.
Both KOI 1 and KOI 2 can be updated the same way, refer to the following article for more information.
💡KOI 1 upgrading to KOI2
KOI 1 users can get access to the improvements of the KOI 2 by updating the firmware to V4.
Remove the micro SD card from the KOI before updating.
Files such as Image Classifier Models/photos can be stored on board instead of needing an SD card after updating to V4 model.
V4 Firmware for KOI 1
Latest firmware V4.0.7
This version is applicable to:
Upgrading Original KOI 1(Micro USB Port) to V4 firmware.
Periodic updates for KOI 1 that has been upgraded to V4 firmware.
💡KOI 2 (Type C) Periodic Updates
Latest Firmware V4.0.7
This version is applicable to:
Periodic Updates for KOI 2(USB Type C).
For past firmware versions, please visit the following page:
How to update KOI firmware
Use a USB cable to connect KOI to the computer.
Unzip the firmware files and open KOI_Flasher.exe.
KOI will be updated automatically.
Do not unplug the USB cable or turn off the computer during the update process.
The update takes approximately 10 minutes, you can close the program after Rebooting is shown.
Reboot the KOI to see if it has been updated.
KOI Firmware Update Demo Video
KOI 1 Reverting Firmware to V1
Follow the instructions for reverting firmware to V1. (Only applicable for KOI 1)
KOI Firmware Update
